Valentine's Teaser

I got another tutorial for you, coming up soon. And it involves ones of these:
You might want to run out and grab one before they are gone. I've seen bigger ones at Michael's but this little one came from Target, in their dollar section. Perfect size for little fingers. :)

Hanging Wooden Letters Tutorial, Part 2

For the first part of the tutorial click here

Sorry for the delay but recovery took longer than normal when my son got sick too. Anyways, here's the second and final part of the tutorial for the hanging letters. Ok, so by now the glossy coat has completely dried on your letters. Now you need to attach your animals.

Figure out where you want to place your animal before applying the glue to the letter.
Only use a small amount glue to avoid having some spill out onto the letter once you press down.
After you have glued the animal, place the clamps on it and let dry overnight. Repeat for all letters and animals.
This part took me a couple of days since I didn't have enough clamps to do all 4 animals at once. Here's the result after a few days of waiting:

After all the animals have been placed onto your letters it's time to add the ribbon. Here is where you can be creative. For me personally, I wanted a simple ribbon loop with no frills (this is for a little boy after all). But you can add a bow or a simple knot at the top of the loop, where it would hang from the hook. It's completely up to you.

If you plan on following my example, I cut my ribbon into 10 inch long pieces. Then I placed a small dot of glue on the back of the letter at the widest part.
Don't put them too close together, it will help balance the letter if the ribbon ends are a bit away from each other. Let the glue set for the required time before hanging. Repeat for each letter.

Hang in the nursery, or wherever, and enjoy.
Just don't hang too low, or else little babies will grab at it and pull down. Case in point, my taller than average 2 year old! :)


Linking up here:

Hanging Wooden Letters Tutorial, Part 1

I've always loved the look of having my son's name somewhere in his nursery, you see it all over home decor magazines and catalogs. I've been wanting to do this hanging letter project since my son was born but never got around to it. Plus, I was never able to find the perfect letters for his name or find all the letters in the same font. A few months back I found the perfect letters and bonus, I was able to find ALL the letters I needed. So needless to say I snatched them up and hoarded stored them away until recently when I found the time to paint. So here's a little tutorial on how I did this project:

Gather all your supplies:

• Wooden/MDF letters (mine were $1.99 each at Michaels)
• Craft acrylic paint (I bought Apple Barrel in Gloss, $1.29 each at Michaels)
• Wooden animals ($0.59 each at Michaels)
• Brushes, newspaper, etc.

Not pictured, but still needed:

• Ribbon
  
• Clear gloss spray paint
• Gorilla glue or some other glue or epoxy
  
• Clamps
• Fine grain sandpaper (use the one that specifically mentions it's for in between paint coats)
• Wax paper (I placed a sheet of wax paper underneath my painted letters to prevent the newspaper from getting stuck in the paint)

Just a quick note: My son's nursery is a jungle theme, but you can add any shapes you want to your letters. The instructions are the same regardless of whether you add flowers or lions. You can also choose to not add any other elements and simply paint the letters and add ribbon. It's completely up to you.
Paint your letters in whatever color(s) you choose. If you got MDF letters (like mine) or a darker wood then you may want to prime it first to prevent adding extra steps. Acrylic paint dries really fast so you'll be able to get a few coats done in under an hour. Don't forget to paint the sides!

After you paint a few coats, let dry completely before you use a fine grain sandpaper. Lightly sand each letter until smooth. Don't forget to sand the sides too. After you sand, paint one more coat (or in my case, two) to get the color you want. Let dry completely.
To get the polka dots, I used the tip of an unused pencil eraser, dipped it into my second paint color, and wiped off the excess before putting it on the letter. I didn't use a pattern, just placed my dots sporadically. Don't forget to place dots on the edges of the letter, edges need love too. :) And don't worry about getting the perfect dot the first time around. I placed all my dots on the letter first then went back a second time and filled in where needed.
I did polka dots for all the letters and this was my end result. But you can do other designs as well, experiment and see what you come up with. Let your polka dots dry completely overnight before going on to the next step.
After letting the letters dry overnight take them outside or to a well ventilated room and spray with a coat or two of clear glaze. Give them another night to dry completely before moving to the next step.

Unfortunately, this is where I must leave you. In the midst of this project I got sick and I've been holed up in my bedroom for the last few days. Give me another day or two and I will return with the second part of this tutorial. I hope you like the tutorial thus far, next up is adding the animals and ribbon. :)

edit// Here's the link to part 2

Linking up here:

Christmas Gifts

I was sewing up until the very last minute and by that I mean I crawled into bed at 2:30 am Christmas morning. But I got everything done and wrapped and mailed out on time. Best part is that everyone liked their gifts. :)

My sister got a spa set made from a set of towels. The largest towel is a wrap, the wash cloth is a little pouch and the hand towel is a toothbrush and face wash travel case.

Both my nephews both I-Spy bags, monogrammed with their initials. They have slightly different things inside each bag, so I took a picture of the toys inside and then made a list as well. I got them laminated at Office Depot for under $2, perfect for rowdy little boys.

Alex got the road map quilt that I mentioned in this post. The back is made up of various scraps I had in my stash except for two fabrics, which I got just enough for this project. The binding is a green polka dot I found at Walmart, gotta love that store!
I used an invisible nylon thread and quilted along the train tracks and the road that goes down the center. Originally I was going to use matching thread but I decided to use invisible thread instead, I'm so glad I did. It came out great.
The tag didn't turn out as well as I had hoped. I printed it out on the printable fabric that is supposedly washable (and it won't run) but God had other plans for me. I love this little tag but I'm thinking I may end up taking it off and embroidering a tag instead. I'd probably use the green polka dots for the new tag, but that project will be for another day. I want to embroider a tag for his first birthday quilt too, so this tag will be sticking around for a while until I can muster up the energy to do both.

Gavin's Quilt

I've had this quilt top finished for a while now, but haven't found the time to post up here. Gavin is one of the older brothers of Saben. I mentioned I was making all three boys their own quilts here. His mom gave me a top 5 list of what he liked so I found some fabric that went along with that list. Right now he's into space rockets, aliens, ambulances, police cars and fire trucks among other things. Here's what I came up with:


And of course, we had to personalize it with his name. :) And I'm happy to say I've found a great tutorial on appliques and this time it came out perfect! Slow and steady is the key ;)
Once I start the actual quilting I'm planning on doing a bit of free motion in the white fabric around the letters. Maybe put a cute design or something in a contrasting thread color so it's not so white.

So here's the stats on this quilt:

• The finished measurements for the top is 35" x 42"
• The finished size of the squares are 7" x 7" (I cut them 7.5" x 7.5" for a 1/4" seam allowance)
• The other twin (Logan) will have this same pattern but with different fabrics
  
• There won't be a border on either of the twins' quilts. I wanted them slightly different than their younger brother's but still keeping with the overall block pattern.
• However, I am thinking of making the binding wider on these quilts so you can see more of it

All that's left to do for this quilt is find a great fabric for the back and a coordinating one for the binding. :) I'm still on the hunt for that last perfect fabric for Logan's quilt.

Giving Thanks

source

Today I am thankful for a number of things, here are just a few:

• I am eternally thankful that my Lord and Savior has welcomed me back into his open arms, calling me His child once again.
• I am thankful for my husband, who is my absolute rock.
• I am thankful that my son is healthy and happy.
• I am thankful for my family and my husband's family.
• I am thankful for my friends whom I've known since high school and those whom I've met through the Navy. They have stuck by me through it all and have shown me that distance does not diminish a true friendship.

What are you thankful for today?

Saben's Quilt

One of my best girlfriends had a little boy one week before I had my son. He was born 10 weeks early and he is a fighter. He is extremely intelligent and one day he is going to be a wonderful man, father and husband because of his wonderful mother.

On his first birthday I promised that I would make him a quilt but life got in the way and now here we are, roughly 4 months until he (and my baby) are two! So with a little help from Mom, I created a quilt just for him with all of his favorite things on it. I hope they both like it. :)



This is only my second time appliqueing, the corners are still pretty tough on me. But I'm learning so much and getting better with each one. :) Of course, I had to add a few little tags. Mommas like to know how to wash their baby's things so I added a little washing tag and another marking the occasion.



This quilt is a part of theBloggers' Quilt Festival! Check out the others here: